基于UG NX 8.0的复杂曲面三维建模及数控加工
叶煜松，黄志荣
（常州工学院 机电工程学院，江苏 常州 213002）
摘要：基于UG NX 8.0平台，以灯罩这一复杂曲面为例，详细介绍了复杂曲面的造型方法，并研究了UG CAM中平面铣、型腔铣和固定轴曲面铣在复杂曲面三轴数控加工中的应用情况。
关键词：UG NX 8.0；复杂曲面；CAD/CAM
3D Modeling and NC machining of the complex surface based on UG NX 8.0
YE Yu-song，HUANG Zhi-rong
( School of Mechanical & Electrical Engineering, Changzhou Institute of Technology, Changzhou 213002, China )
Abstract：In this paper, the complex surface of lamp-chimney was taken for the object. Based on UG NX8.0 platform, the modeling methods of complex surface were introduced in details. The application of Planar-Mill, Cavity-Mill and Fixed-Contour of UG CAM in three axis NC machining of complex surface was researched.
Key words：UG NX 8.0；complex surface；CAD/CAM
———————————————
收稿日期：2014－02－17
作者简介：叶煜松（1968－），男，江苏靖江人，本科，职称讲师，主要研究方向为CAD/CAM。
设为首页 | 加入收藏 | 免责条款
《机械》杂志版权所有 Copyright©2008-2012 Jixiezazhi.com All Rights Reserved
电话：028-85925070 传真：028-85925073 E-mail：jixie@vip.163.com
地址：四川省成都锦江工业开发区墨香路48号 邮编：610063
Powered by PageAdmin CMS