铁路车轴微动磨损对微动裂纹扩展的影响研究
魏永刚
（吉林铁道职业技术学院 铁道机车学院，吉林 吉林 132000）
摘要：仿真计算了磨损/未磨损情况下不同深度微动裂纹尖端的等效应力强度因子ΔKeq，并从接触状态和应力分布两个角度阐述了影响机理。对于铁路车轴，考虑微动磨损时计算的ΔKeq更大，微动磨损促进了微动裂纹的扩展。当微动裂纹深度不大于2 mm时，磨损/未磨损情况下计算的ΔKeq相对误差大于7%。由于微动磨损，车轴轮座配合边缘及附近的区域出现了张开区，释放了过盈配合导致的压应力。此外，微动磨损在车轴轮座内部引入的应力集中增加了配合面下方的应力场。这两方面的共同作用促进了微动裂纹向车轴深度方向扩展。微动磨损对裂纹扩展的影响不能忽略，建议在车轴微动裂纹剩余寿命的评估中考虑微动磨损的影响。
关键词：铁路车轴；过盈配合；微动磨损；微动裂纹
中图分类号：TP204；U270.33 文献标志码：A doi：10.3969/j.issn.1006-0316.2024.02.005
文章编号：1006-0316 (2024) 02-0026-07
Investigation on the Effect of Fretting Wear on Fretting Crack Propagation of Railway Axles
WEI Yonggang
( College of Railway Locomotive, Jilin Railway Technology College, Jilin 132000, China )
Abstract：In this paper, the equivalent stress intensity factors ΔKeq of fretting crack tips at different crack depths in the case of worn/unworn were calculated. Thereafter, the influence mechanism was clarified from two perspectives of contact status and stress distribution. For railway axles, ΔKeq was greater for the worn axles, which promoted the fretting crack propagation. When the crack depth was not greater than 2 mm, the relative error of ΔKeq calculated under the worn/unworn condition was greater than 7%. Owing to fretting wear, an open zone appeared near the contact edge of the wheel seat, releasing the compressive stress induced by the interference fit. In addition, the stress concentration introduced by fretting wear increased the stress field below the contact surfaces. The combined effect of these two aspects promoted thefretting cracks propagation to the depth direction of the axle. The influence of fretting wear on crack propagation cannot be neglected, and it is recommended to take the influence of fretting wear in evaluating the remaining life of fretting cracks.
Key words：railway axle；interference fit；fretting wear；fretting crack
———————————————
收稿日期：2023-06-19
基金项目：吉林省高教学会高教科研课题——基于校企“双元”合作的《机车车辆制造工艺学》课程教学资源库的建设与应用（JGJX2022 D723）
作者简介：魏永刚（1993－），男，山东菏泽人，硕士，讲师，主要研究方向为机车牵引、材料强度，E-mail：wyg19931224@163.com。
（吉林铁道职业技术学院 铁道机车学院，吉林 吉林 132000）
摘要：仿真计算了磨损/未磨损情况下不同深度微动裂纹尖端的等效应力强度因子ΔKeq，并从接触状态和应力分布两个角度阐述了影响机理。对于铁路车轴，考虑微动磨损时计算的ΔKeq更大，微动磨损促进了微动裂纹的扩展。当微动裂纹深度不大于2 mm时，磨损/未磨损情况下计算的ΔKeq相对误差大于7%。由于微动磨损，车轴轮座配合边缘及附近的区域出现了张开区，释放了过盈配合导致的压应力。此外，微动磨损在车轴轮座内部引入的应力集中增加了配合面下方的应力场。这两方面的共同作用促进了微动裂纹向车轴深度方向扩展。微动磨损对裂纹扩展的影响不能忽略，建议在车轴微动裂纹剩余寿命的评估中考虑微动磨损的影响。
关键词：铁路车轴；过盈配合；微动磨损；微动裂纹
中图分类号：TP204；U270.33 文献标志码：A doi：10.3969/j.issn.1006-0316.2024.02.005
文章编号：1006-0316 (2024) 02-0026-07
Investigation on the Effect of Fretting Wear on Fretting Crack Propagation of Railway Axles
WEI Yonggang
( College of Railway Locomotive, Jilin Railway Technology College, Jilin 132000, China )
Abstract：In this paper, the equivalent stress intensity factors ΔKeq of fretting crack tips at different crack depths in the case of worn/unworn were calculated. Thereafter, the influence mechanism was clarified from two perspectives of contact status and stress distribution. For railway axles, ΔKeq was greater for the worn axles, which promoted the fretting crack propagation. When the crack depth was not greater than 2 mm, the relative error of ΔKeq calculated under the worn/unworn condition was greater than 7%. Owing to fretting wear, an open zone appeared near the contact edge of the wheel seat, releasing the compressive stress induced by the interference fit. In addition, the stress concentration introduced by fretting wear increased the stress field below the contact surfaces. The combined effect of these two aspects promoted thefretting cracks propagation to the depth direction of the axle. The influence of fretting wear on crack propagation cannot be neglected, and it is recommended to take the influence of fretting wear in evaluating the remaining life of fretting cracks.
Key words：railway axle；interference fit；fretting wear；fretting crack
———————————————
收稿日期：2023-06-19
基金项目：吉林省高教学会高教科研课题——基于校企“双元”合作的《机车车辆制造工艺学》课程教学资源库的建设与应用（JGJX2022 D723）
作者简介：魏永刚（1993－），男，山东菏泽人，硕士，讲师，主要研究方向为机车牵引、材料强度，E-mail：wyg19931224@163.com。
- 上一篇：含膨胀元件的接触网与受电弓动力学特性分析
- 下一篇：列车万向轴故障电机端识别方法研究
设为首页 | 加入收藏 | 免责条款
《机械》杂志版权所有 Copyright©2008-2012 Jixiezazhi.com All Rights Reserved
电话：028-85925070 传真：028-85925073 E-mail：jixie@vip.163.com
地址：四川省成都锦江工业开发区墨香路48号 邮编：610063
Powered by PageAdmin CMS