结晶器振动装置固有频率理论研究
王会刚1，崔福龙2，林刚2，代宗岭2
（1.唐山学院 机电工程系，河北 唐山 063000；2.中冶京诚工程技术有限公司，北京 100076）
摘要：介绍了一种结晶器液压振动装置。该装置采用一个液压缸驱动装置，全板簧导向结构。进行了结晶器的三维模型的建立与网格划分，选取板弹簧力学模型与振动模型进行了结晶器系统固有频率的计算，得到结晶器的第一阶模态为左右偏摆振动，第二阶模态为上下垂直振动，计算得到的结晶器振动本体装置固有频率与现场振动偏摆测得数据相同，验证了理论方法计算的正确性和实用性。该计算方法可通过合理布置各部件达到最优的刚度布置，从而使振动装置的一阶、二阶振型达到最优，使设备各方向的偏摆控制到最小。
关键词：结晶器振动；全板簧导向；固有频率
中图分类号：TH133.5 文献标志码：A doi：10.3969/j.issn.1006-0316.2018.10.011
文章编号：1006－0316 (2018) 10－0046－03
Study on Natural Frequency Analysis of the Mold Oscillation
WANG Huigang1，CUI Fulong2，LIN Gang2，DAI Zongling2
( 1.Mechanical and Electronic Engineering Department, TangShan University, Tangshan 063000, China; 2.Capital Engineer & Research Incorporation Limited, Beijing 100076, China )
Abstract：One type of mold oscillation device is introduced. The mold oscillation device is driven by one hydraulic cylinder and guided by leaf springs. The three-dimensional model of the mold is established and meshed, and based on the by the plate spring mechanical model and the vibration model, the natural frequency of the mold system is calculated. The first mode of the crystallizer is calculated by the left and right pendulum oscillations, and the second order mode is the vertical and upper vertical vibration. The calculated intrinsic frequency of the mold vibration body is the same as that measured in the field vibration bias. The correctness and practicability of the theoretical method are verified. The calculation method can achieve the optimal stiffness layout by arranging the components rationally, the first and the second order vibration modes of the vibration device can be optimized, so that the deflection of the equipment is controlled to the minimum in all directions.
Key words：mold oscillation；leaf spring guidance；natural frequency
———————————————
收稿日期：2018－01－18
基金项目：唐山市科技计划项目（15110206a）
作者简介：王会刚（1968－），男，河北唐山人，博士，教授，主要研究方向为现代设计、先进制造；崔福龙（1978－），男，河北唐山人，博士研究生，主要研究方向为机械设计及理论。
- 上一篇：带堆焊层和复合层角焊缝超声波检测应用
- 下一篇：一种无人机干扰器的创新设计
设为首页 | 加入收藏 | 免责条款
《机械》杂志版权所有 Copyright©2008-2012 Jixiezazhi.com All Rights Reserved
电话：028-85925070 传真：028-85925073 E-mail：jixie@vip.163.com
地址：四川省成都锦江工业开发区墨香路48号 邮编：610063
Powered by PageAdmin CMS