SolidWorks生成符合国标工程图的方法与应用
薛峰，张瑞琳*，吕杨，苏兴冶，谢晓乐
（沈阳工业大学辽阳分校，辽宁 辽阳 111003）
摘要：SolidWorks软件提供了三维模型生成二维工程图的功能，且三维模型与二维工程图之间同步更新，但生成的工程图许多地方不符合国家标准。为了得到符合国标的工程图，通过设定工程图模块中的各项参数，创建符合国标的工程图模板，针对标准件和常用件及其他不按真实投影绘制的结构，根据国标规定，对其开展工程图标准化处理方法和技巧的研究。结合实例，提出了相应的解决方案，确保工程图标准化的同时，保留工程图与零件三维模型之间数据的相关性。
关键词：SolidWorks；工程图；国家标准；三维模型
中图分类号：TB237 文献标志码：B doi：10.3969/j.issn.1006-0316.2018.02.008
文章编号：1006－0316 (2018) 02－0031－05
The Method and Application of SolidWorks to Generate Engineering Drawing in Line with GB
XUE Feng，ZHANG Ruilin，LV Yang，SU Xingye，XIE Xiaole
( Shenyang University of Technology, Liaoyang Campus, Liaoyang 111003, China )
Abstract：SolidWorks software provides the function that generating a engineering drawing from a 3D model, and the 3D model is synchronized with the two-dimensional drawing, but the engineering drawings do not meet the national standards. In order to obtain the engineering drawings in line with the national standards, by setting the parameters in the drawing module, a drawing template can be created, In view of the standard parts, common parts and other structures which are not drawn according to the real projection, According to the provisions of the national standard painting, carry out the standardization of engineering drawings and techniques of research, combined with examples, proposed a corresponding solution to ensure that the standardization of engineering at the same time, to retain the engineering drawings and parts of the three-dimensional model between the data.
Key words：SolidWorks；engineering drawings；national standards；three-dimensional model
———————————————
收稿日期：2017－09－01
作者简介：薛峰（1995－），江苏常州人，本科，主要研究方向为过程装备与控制工程。*通讯作者：张瑞琳（1965－），女，内蒙古包头人，硕士，副教授，主要研究方向为工程图学、流体机械。
设为首页 | 加入收藏 | 免责条款
《机械》杂志版权所有 Copyright©2008-2012 Jixiezazhi.com All Rights Reserved
电话：028-85925070 传真：028-85925073 E-mail：jixie@vip.163.com
地址：四川省成都锦江工业开发区墨香路48号 邮编：610063
Powered by PageAdmin CMS