特殊类型立铣刀数字化设计与制造系统的研制
金晓波，曹军，康万军
（成都飞机工业（集团）有限公司 技装设计所，四川 成都 610092）
摘要：数控立铣刀的设计、制造是保证产品顺利生产的关键因素之一，针对特殊类型数控立铣刀开发了一套数字化设计与制造系统，该系统采用模块化设计，由数据管理模块及刀具三维CAD、制造仿真、测量和二维CAD等四个功能模块构成，各功能模块依靠数据管理模块既能单独运行，又可以根据设计流程来设计新刀具，能够保证刀具设计的正确性和刀具的可制造性。
关键词：特殊类型立铣刀；三维CAD；制造仿真；模块化设计
中图分类号：TG714 文献标识码：A 文章编号：1006－0316 (2013) 05－0063－05
The development of digital design and manufacture system for special end milling
JIN Xiao-bo，CAO Jun，KANG Wan-jun
( Institute of Technology Equipment, Chengdu Aircraft Industry Corporation, Chengdu 610092 China)
Abstract：The design and manufacture of NC milling cutter is one of the key factors to promise production successfully. It developed one system of design and manufacture for special end milling in this paper. The system use the method of modular design, it contains the module of data management and four function modules as three-dimensional CAD, manufacturing simulation, measurement and two-dimensional CAD. Depended on data management module, each function module can not only work independently, but also design new cutter according to the process. The system can promise the correctness of the design and manufacturability.
Key words：special end milling；three-dimensional CAD；manufacturing simulation；modular design
———————————————
收稿日期：2012－10－29
作者简介：金晓波（1963－），男，江西赣州人，本科，高级工程师，航空工艺装备主任设计师，主要研究方向为航空工艺装备设计。
- 上一篇：电火花微细孔加工关键技术研究
- 下一篇：工程机械的工业设计应用技巧研究
设为首页 | 加入收藏 | 免责条款
《机械》杂志版权所有 Copyright©2008-2012 Jixiezazhi.com All Rights Reserved
电话：028-85925070 传真：028-85925073 E-mail：jixie@vip.163.com
地址：四川省成都锦江工业开发区墨香路48号 邮编：610063
Powered by PageAdmin CMS