基于LabVIEW的滚压破岩模拟试验机研制
杨康辉，吴志鑫，刘少锐，郑靖
（西南交通大学 机械工程学院 摩擦学研究所，四川 成都 610031）
摘要：为考察不同环境工况下TBM滚刀的破岩特性，研制了一台小型滚压破岩模拟试验机。该试验机采用模块化设计，主要由基体及动力执行模块、数据采集模块、介质流率与温度控制模块三部分组成。其中，基体及动力执行模块主要包含试验机基体、加载主轴、滚刀夹具和岩石夹具，用来支撑试验装置和提供动力；基于LabVIEW的数据采集模块（力信号监测与分析系统）可在试验过程中实时显示和存储滚刀试样的法向力、滚动力、侧向力和摩擦系数数据；介质流率与温度控制模块由精密恒流蠕动泵、温度控制器和加热负载组成，用于试验过程中介质溶液的引入和温度保持。试验机的滚刀安装半径、介质环境、法向载荷、运动速率和时长等工况参数均可调。滚刀/大理岩在25 ℃去离子水介质工况下两种法向载荷作用的滚动摩擦磨损试验结果表明，该试验机可开展TBM滚刀在不同温度介质环境下的滚压破岩模拟试验。
关键词：TBM滚刀；滚压破岩；模拟试验机；LabVIEW
中图分类号：TH117.1 文献标志码：A doi：10.3969/j.issn.1006-0316.2024.04.008
文章编号：1006-0316 (2024) 04-0050-09
Development of Rock Breaking Simulation Testing Machine Based on LabVIEW
YANG Kanghui，WU Zhixin，LIU Shaorui，ZHENG Jing
( Tribology Research Institute, School of Mechanical Engineering, Southwest Jiaotong University, Chengdu 610031, China )
Abstract：In order to investigate the rock-breaking characteristics of TBM cutters under different environmental conditions, a small rock-breaking simulation testing machine is designed and developed in this paper. The testing machine is designed based on modular design methodology and is mainly composed of three parts: the base body and power execution module, the data acquisition module, and the medium flow and temperature control module. The base body and power execution module mainly includes the base body of the testing machine, the loading spindle and related fixtures, which are used to support the components of the testing machine and provide power. The data acquisition module based on LabVIEW (the force signal monitoring and analysis system) can display and store the normal force, rolling force, lateral force, and friction coefficient data of the cutter sample in real time during the testing process. The medium flow and temperature control module is mainly composed of a precise peristaltic pump with controllable flow, a temperature controller, and a heating device, which are used to introduce the medium solution and maintain the medium temperature during the experiment. The operating parameters of the testing machine allows for adjustable parameters such as the installation radius, medium environment, normal force, rotating angular, velocity and duration of the cutter. The cutter/marble rolling friction and wear test results under two normal loads at 25 ℃ in deionized water show that the testing machine can conduct rock-breaking simulation tests of TBM cutters under the medium environments with different temperature.
Key words：TBM cutter；rock-breaking；simulation testing machine；LabVIEW
———————————————
收稿日期：2023-04-17
基金项目：国家自然科学基金——基于侵岩生物模本的岩石材料摩擦－化学去除行为与机理研究（52075459）；四川省国际科技创新合作/港澳台科技创新合作项目——基于天然牙表面拓扑结构的TBM刀具耐磨仿生设计研究（2020YFH0018）
作者简介：杨康辉（1997－），男，山西运城人，硕士研究生，主要研究方向为仿生摩擦学，E-mail：947419303@qq.com。
*通讯作者：郑靖（1974－），女，河南南阳人，博士，研究员，主要研究方向为生物与仿生摩擦学，E-mail：jzheng168@home.swjtu.edu.cn。
（西南交通大学 机械工程学院 摩擦学研究所，四川 成都 610031）
摘要：为考察不同环境工况下TBM滚刀的破岩特性，研制了一台小型滚压破岩模拟试验机。该试验机采用模块化设计，主要由基体及动力执行模块、数据采集模块、介质流率与温度控制模块三部分组成。其中，基体及动力执行模块主要包含试验机基体、加载主轴、滚刀夹具和岩石夹具，用来支撑试验装置和提供动力；基于LabVIEW的数据采集模块（力信号监测与分析系统）可在试验过程中实时显示和存储滚刀试样的法向力、滚动力、侧向力和摩擦系数数据；介质流率与温度控制模块由精密恒流蠕动泵、温度控制器和加热负载组成，用于试验过程中介质溶液的引入和温度保持。试验机的滚刀安装半径、介质环境、法向载荷、运动速率和时长等工况参数均可调。滚刀/大理岩在25 ℃去离子水介质工况下两种法向载荷作用的滚动摩擦磨损试验结果表明，该试验机可开展TBM滚刀在不同温度介质环境下的滚压破岩模拟试验。
关键词：TBM滚刀；滚压破岩；模拟试验机；LabVIEW
中图分类号：TH117.1 文献标志码：A doi：10.3969/j.issn.1006-0316.2024.04.008
文章编号：1006-0316 (2024) 04-0050-09
Development of Rock Breaking Simulation Testing Machine Based on LabVIEW
YANG Kanghui，WU Zhixin，LIU Shaorui，ZHENG Jing
( Tribology Research Institute, School of Mechanical Engineering, Southwest Jiaotong University, Chengdu 610031, China )
Abstract：In order to investigate the rock-breaking characteristics of TBM cutters under different environmental conditions, a small rock-breaking simulation testing machine is designed and developed in this paper. The testing machine is designed based on modular design methodology and is mainly composed of three parts: the base body and power execution module, the data acquisition module, and the medium flow and temperature control module. The base body and power execution module mainly includes the base body of the testing machine, the loading spindle and related fixtures, which are used to support the components of the testing machine and provide power. The data acquisition module based on LabVIEW (the force signal monitoring and analysis system) can display and store the normal force, rolling force, lateral force, and friction coefficient data of the cutter sample in real time during the testing process. The medium flow and temperature control module is mainly composed of a precise peristaltic pump with controllable flow, a temperature controller, and a heating device, which are used to introduce the medium solution and maintain the medium temperature during the experiment. The operating parameters of the testing machine allows for adjustable parameters such as the installation radius, medium environment, normal force, rotating angular, velocity and duration of the cutter. The cutter/marble rolling friction and wear test results under two normal loads at 25 ℃ in deionized water show that the testing machine can conduct rock-breaking simulation tests of TBM cutters under the medium environments with different temperature.
Key words：TBM cutter；rock-breaking；simulation testing machine；LabVIEW
———————————————
收稿日期：2023-04-17
基金项目：国家自然科学基金——基于侵岩生物模本的岩石材料摩擦－化学去除行为与机理研究（52075459）；四川省国际科技创新合作/港澳台科技创新合作项目——基于天然牙表面拓扑结构的TBM刀具耐磨仿生设计研究（2020YFH0018）
作者简介：杨康辉（1997－），男，山西运城人，硕士研究生，主要研究方向为仿生摩擦学，E-mail：947419303@qq.com。
*通讯作者：郑靖（1974－），女，河南南阳人，博士，研究员，主要研究方向为生物与仿生摩擦学，E-mail：jzheng168@home.swjtu.edu.cn。
设为首页 | 加入收藏 | 免责条款
《机械》杂志版权所有 Copyright©2008-2012 Jixiezazhi.com All Rights Reserved
电话：028-85925070 传真：028-85925073 E-mail：jixie@vip.163.com
地址：四川省成都锦江工业开发区墨香路48号 邮编：610063
Powered by PageAdmin CMS