某型火炮空投试验平台设计研究
吴大林1，何健1，杜中华1，李心强2
（1.军械工程学院，河北 石家庄 050003；2.73121部队，福建 福州 350000）
摘要：为节约某型火炮的试验成本，降低风险，需要设计火炮空投试验平台，进行模拟空投试验。首先，基于空投试验平台功能组成分析，利用SolidWork软件设计了空投火炮试验平台的各部分结构；然后根据其结构特性，对其强度进行了初步校核；最后，以某型自行火炮为研究对象，利用ADAMS软件建立其简化虚拟样机，对三种典型着陆工况进行了空投着陆仿真计算。结果表明，该试验平台可以实现火炮着陆工况的模拟，能够基本满足空投定型试验的需求。
关键词：火炮；空投；试验平台；ADAMS
中图分类号：TJ303 文献标志码：A doi：10.3969/j.issn.1006-0316.2015.08.005
文章编号：1006－0316 (2015) 08－0019－06
Design analysis for a self-propelled gun airdrop test platform
WU Dalin1，HE Jian1，DU Zhonghua1，LI Xinqiang2
( 1.Ordnance Engineering College, Shijiazhuang 050003, China; 2.Troop No. 72465 of PLA, Fuzhou 350000, China )
Abstract：To reduce the airdrop test cost and risk for a self-propelled gun, the airdrop test platform is designed for simulation airdrop test. Firstly, based on the analysis for the function of the airdrop test platform, the structural design of the platform was made with the CAD software SolidWork. Secondly, according to its function characteristic, the strength anslysis was made. Finally, to simulate the airdrop test, the reduced virtual prototyping of a self-propelled gun was built with simulation software ADAMS, and the three typical airdrop landing process were simualted. The analysis shows that the test platform can realize the gun airdrop landing process simulation, which is satisfied with the requirement of the airdrop evaluation test.
Key words：gun；airdrop；test platform；ADAMS
———————————————
收稿日期：2014－12－15
作者简介：吴大林（1980－），男，福建连江人，博士，讲师，主要从事武器系统动力学仿真工作。
- 上一篇：航空活塞发动机机匣微振磨损可用度分析与预测
- 下一篇：中药汤剂数字化系统的开发研究
设为首页 | 加入收藏 | 免责条款
《机械》杂志版权所有 Copyright©2008-2012 Jixiezazhi.com All Rights Reserved
电话：028-85925070 传真：028-85925073 E-mail：jixie@vip.163.com
地址：四川省成都锦江工业开发区墨香路48号 邮编：610063
Powered by PageAdmin CMS