供电辅控设备的研制
祝贺利,景月,崔再铎
(沈阳航天新光集团有限公司,辽宁 沈阳 110043)
摘要:燃气轮机发电机组返厂维修期间,供电辅控设备对整个动力系统的功能进行补充,保证了系统全年不间断工作的需求。供电辅控设备的散热能力关系到电气部件良好的传热性能和可靠性,根据散热要求,计算得出进风口临界面积为42 cm2,实际设计为121 cm2,满足设备散热要求。整套设备的控制系统由单片机及其接口电路组成,采集器将数据采集信息处理程序软件固化在存储器内,通过控制器实现指令的接收与传递。整套供电辅控设备机电一体化程度高,提高了动力系统缺少燃气轮机发电机组时的工作能力及稳定性。
关键词:箱体设计;热设计;整流装置
中图分类号:TK478 文献标志码:A doi:10.3969/j.issn.1006-0316.2015.05.015
文章编号:1006-0316 (2015) 05-0055-04
The design of assisted control equipment for power supply
ZHU Heli,JING Yue,CUI Zaiduo
( Shenyang Aerospace Xinguang Group Co., Ltd., Shenyang 110043, China )
Abstract:During the gas turbine generator back to factory maintenance, the motility system has been recruited with the control equipment for power supply, that the system can keep work all year long. The heat radiating ability of the control equipment for power supply can effect the diathermancy and the dependability of the electric assembly, basis on the heat radiating requirement, the area of the wind-inlet can be calculated is 42 cm2, but in fact is designed 121 cm2, so the require of the heat radiating is content. The equipment system is composed by the SCM and the interface circuit. The program software for data gathering compiled in the memorizer by the collector, incepting and passing the comment by the controller. The whole equipment is whit a high degree of mechanical and electronic integration, the ability and stability has been improved when there is no gas turbine generator working for dynamical system.
Key words:body design;thermal design;rectifying device
———————————————
收稿日期:2014-11-11
作者简介:祝贺利(1978-),女,辽宁彰武人,本科,高级工程师,主要研究方向为能源装备制造。
 

 

设为首页  |  加入收藏    |   免责条款
《机械》杂志版权所有     Copyright©2008-2012 Jixiezazhi.com All Rights Reserved 

  电话:028-85925070    传真:028-85925073    E-mail:jixie@vip.163.com

地址:四川省成都锦江工业开发区墨香路48号   邮编:610063

蜀ICP备08103512号

Powered by PageAdmin CMS