基于ANSYS的锚杆钻机钻架仿真分析
崔雷1，李璇2，冯学俊2
（1.恒源煤电股份公司，安徽 淮北 235162；2.中国矿业大学 信电学院，江苏 徐州 221008）
摘要：钻架作为锚杆钻机中重要的工作机构，承受着复杂的外力，而目前传统的弹性力学理论难以对钻架整体力学性能进行准确的计算。基于ANSYS软件对钻架进行了静力学仿真分析，得到了钻架的应力与变形云图，指出了其结构中薄弱环节，为下一步的优化设计提供了参考依据。
关键词：底板支护；锚杆钻机；钻架；ANSYS
中图分类号：TD353+.6 文献标志码：A doi：10.3969/j.issn.1006-0316.2015.03.011
文章编号：1006－0316 (2015) 03－0041－03
Simulation and analysis of drilling frame of roof bolter based on ANSYS
CUI Lei1，LI Xuan2，FENG Xue-jun2
( 1.Hengyuan Coal-Electricity Group Co., Ltd., Huaibei 235162, China;
2.School of Information and Elactrical Engineering, China University of Mining and Technology, Xuzhou 221008, China )
2.School of Information and Elactrical Engineering, China University of Mining and Technology, Xuzhou 221008, China )
Abstract：The drilling frame as a working mechanism in an important anchor drilling machine, under the complicated force, and at present the theory of elastic mechanics, it is difficult for traditional drilling frame overall mechanical properties were calculated accurately. In this paper, based on the ANSYS software of the drill frame is analyzed, obtained the drill frame stress and deformation, points out the weak link of the structure, provides the reference for optimizing design of the next step.
Key words：floor support；roof bolter；drilling frame；ANSYS
———————————————
收稿日期：2014－09－22
作者简介：崔雷（1977－），男，安徽亳州人，本科，助理工程师，主要研究方向为煤矿机电技术。
设为首页 | 加入收藏 | 免责条款
《机械》杂志版权所有 Copyright©2008-2012 Jixiezazhi.com All Rights Reserved
电话：028-85925070 传真：028-85925073 E-mail：jixie@vip.163.com
地址：四川省成都锦江工业开发区墨香路48号 邮编：610063
Powered by PageAdmin CMS