TP45型吊管机吊臂结构的有限元分析及试验验证
王琪1,唐苏1,王汉成2,陈四杰1
(1.江苏科技大学 机械工程学院,江苏 镇江 212003;2.江苏天普重工有限公司,江苏 扬州 225222)
摘要:吊臂是履带式吊管机的关键部件,其强度和重量影响起吊性能的好坏,所以针对吊臂结构的分析研究是很有必要的。根据履带式吊管机的施工特点,以TP45型履带式吊管机吊臂为研究对象,利用ANSYS软件对其结构进行载荷计算和有限元建模分析,通过校核等效应力值、变形量和许用值的大小,得出吊臂强度和刚度符合设计要求。最后通过试验验证和对比分析,得出有限元分析方法具有一定的可行性和参考性,能够有效避免大量的型式试验工作,对吊管机吊臂的改进和制造工作起到一定指导作用。
关键词:吊管机;吊臂;有限元分析;试验验证
中图分类号:TE937 文献标志码:A doi:10.3969/j.issn.1006-0316.2014.12.006
文章编号:1006-0316 (2014) 12-0017-05
Finite element analysis of TP45 pipelayer boom and the test verification
WANG Qi1,TANG Su1,WANG Han-cheng2,CHEN Si-jie1
( 1.School of Mechanical Engineering, Jiangsu University of Science and Technology, Zhenjiang 212003, China; 2.Jiangsu TianPu Heavy Industries Co. Ltd., Yangzhou 225222, China )
Abstract:Boom is the main component of pipelayer. Its strength and weight is related to the lifting capacity of pipelayer. Therefore, taking research on pipelayer boom is very necessary. According the working characteristics of pipelayers, ANSYS is used for the loading analysis and finite element modeling analysis of TP45 pipelayer boom. By comparing the stress and deformation values with allowable values, the pipelayer boom’s strength and rigidity were also checked. Finally, by test verification and comparative analysis, the result shows that the method verifies the feasibility and reference of the product design, effectively avoids a lot of type test work, which has important guiding significance to the improvement and manufacture of pipelayer boom.
Key words:pipelayer;boom;finite element analysis;test verification
———————————————
收稿日期:2014-07-04
基金项目:江苏省科技支撑计划项目(BE2012080);江苏省产学研前瞻性联合研究项目(BY2012179)
作者简介:王琪(1962-),男,江苏盐城人,博士,教授,硕士生导师,主要研究方向为CAD/CAM/CAE/KBE和机械设计制造及其自动化;唐苏(1989-),男,江苏苏州人,硕士研究生,主要研究方向为CAD/CAM/CAE/工程机械设备;王汉成(1989-),男,江苏扬州人,学士,主要研究方向为工程机械设备;陈四杰(1981-),男,河南漯河人,工学博士,讲师,主要研究方向为机器视觉、机械手运动控制及仿真。
 

 

设为首页  |  加入收藏    |   免责条款
《机械》杂志版权所有     Copyright©2008-2012 Jixiezazhi.com All Rights Reserved 

  电话:028-85925070    传真:028-85925073    E-mail:jixie@vip.163.com

地址:四川省成都锦江工业开发区墨香路48号   邮编:610063

蜀ICP备08103512号

Powered by PageAdmin CMS