JC40D钻井绞车改造设计
孙晓微1,2
(1.西安石油大学 机械工程学院,陕西 西安 710065;2.兰州兰石石油装备工程有限公司,甘肃 兰州 730050)
摘要:为了实现安全、优质、高效、低成本钻井,现代石油钻机在20世纪后期推广应用了顶部驱动、盘式刹车和自运送钻等新技术。主要介绍了JC40D绞车改造中的重点工作,带式刹车改为盘式刹车滚筒轴的结构设计;通过计算重新选配驱动电机,使绞车的配置更为合理;通过计算选配、增加自动送钻装置,并和绞车进行一体化设计,使绞车的结构更加紧凑;绞车架的全新设计。
关键词:绞车;盘式刹车;自动送钻
中图分类号:TE922              文献标志码:B           doi:10.3969/j.issn.1006-0316.2014.05.018
文章编号:1006-0316 (2014) 05-0075-04
JC40D Drilling Winch Reconstruction Design
SUN Xiao-wei1,2
( 1.School of Mechanical Engineering, Xi'an Petroleum University, Xi'an 710065, China; 2.Lanzhou LS Petroleum Equipment Engineering Co. Ltd., Lanzhou 730050, China )
Abstract:In order to achieve safe efficient drilling,which is of low cost and high quality, in the late 20th century new technologies were applied such as top driving, disc braking and self-transporting drilling, etc. This paper mainly describes the key work which is that the band braking is designed to disc braking drum shaft. The re-matching drive motor is calculated to make winch configuration more reasonable. The winch structure is more compact by calculating matching, increasing automatic feed drilling device, which are both designed together with the winch, to achieve the new designing of the winch frame.
Key words:winch;disc braking;automatic drilling
 
———————————————
收稿日期:2013-11-28
作者简介:孙晓微(1981-),女,甘肃兰州人,硕士研究生,工程师,主要研究方向为机械设计制造。
 

 

设为首页  |  加入收藏    |   免责条款
《机械》杂志版权所有     Copyright©2008-2012 Jixiezazhi.com All Rights Reserved 

  电话:028-85925070    传真:028-85925073    E-mail:jixie@vip.163.com

地址:四川省成都锦江工业开发区墨香路48号   邮编:610063

蜀ICP备08103512号

Powered by PageAdmin CMS