基于SolidWorks的弯管焊接工装设计

 魏明

(四川优机实业股份有限公司,四川 成都 610041)
摘要:弯管是水泥泵车上的易损易耗零件。弯管两端的法兰尺寸和空间位置尺寸准确度均要求较高。弯管的空间形状复杂,壁厚较薄,铸造难度较大。弯管在新产品试制时常根据铸造工艺需要分成几段铸造。各段弯管加工后,再采用焊接组合成一个弯管零件。利用SolidWorks三维建模软件制作弯管的焊接工装,有效地保证了弯管法兰的空间位置尺寸要求,保证了产品质量,提高了生产效率。此焊接工装经过设计和改进后完全满足了弯管组合焊接需要,完成的弯管零件完全符合泵车装配需要。
关键词:弯管;工装设计;SolidWorks
中图分类号:TG44               文献标志码:B           doi:10.3969/j.issn.1006-0316.2014.05.019
文章编号:1006-0316 (2014) 05-0078-03
Welding fixture design of the elbow based on SolidWorks
WEI Ming
( Sichuan Y&J Industries Co. Ltd, Chengdu 610041, China )
Abstract:Elbow is one of wearing part on the cement pump truck. Flange size and spatial position at both ends of the elbow require high dimensional accuracy. The elbow room is a complex shape. The wall thickness is thinner. casting is difficult. Elbow in new products trial often divided into paragraphs according to the casting process requires casting. Each elbow processing, and then welding combined into a elbow welded parts. Production of elbow welding fixtures using SolidWorks 3D modeling software, effectively ensure the spatial position of the elbow flange size requirements, ensuring product quality, increase production efficiency. After welding fixture design and improvement to fully meet the needs of the elbow combination welding, elbow parts completed in full compliance with pump assembly needs.
Key words:elbow;fixture design;SolidWorks
 
———————————————
收稿日期:2013-12-20
作者简介:魏明(1977-),四川大竹人,本科,工程师,主要从事机械产品设计、零件普通加工和数控加工工艺及三坐标检测工艺等技术工作。
 

 

设为首页  |  加入收藏    |   免责条款
《机械》杂志版权所有     Copyright©2008-2012 Jixiezazhi.com All Rights Reserved 

  电话:028-85925070    传真:028-85925073    E-mail:jixie@vip.163.com

地址:四川省成都锦江工业开发区墨香路48号   邮编:610063

蜀ICP备08103512号

Powered by PageAdmin CMS