液压挖掘机工作装置有限元静强度分析
杨帆,吴小平
(西南交通大学 峨眉校区,四川 峨眉 614202)
摘要:挖掘机的工作装置各部件,回转平台,底架,履带架等一般都是由不同形状和厚度的板类材料焊接而成,这些部件统称为结构件。由于挖掘机的作业工况十分复杂,导致这些部件如铰接点附近会产生较大的应力集中;此外,焊接时引起的变形也会导致不同程度的应力集中,如果在作业中遇到极其恶劣的工况常常会使结构件产生裂纹甚至发生断裂。因此,必须对挖掘机的主要结构件进行强度分析,以找到应力较大或变形较大的部位并设法加以改进,同时,在满足强度要求的前提下应使结构受力更加合理并避免不必要的材料浪费。
关键词:有限元分析;强度分析;应力集中
中图分类号:TP391           文献标识码:A           文章编号:1006-0316 (2013) 04-0056-04
The finite element model of the single bucket backhoe hydraulic excavator’s working device 
YANG Fan,WU Xiao-ping
( Emei campus, Southest JiaoTong University, Emei 614202, China )
Abstract:The operation conditions of the excavator is very complex, which lead to big stress on hinged joint. Deformation of the welding also make big stress concentration. If under the very bad condition, structural parts often make crack even fracture. Because of these reasons,We must make strength analysis on some important structural parts.
Key words:finite element analysis;strength analysis;stress concentration

———————————————
收稿日期:2012-06-03
作者简介:杨帆(1990-),男,四川绵阳人,本科,主要研究方向为工程机械。
 

 

设为首页  |  加入收藏    |   免责条款
《机械》杂志版权所有     Copyright©2008-2012 Jixiezazhi.com All Rights Reserved 

  电话:028-85925070    传真:028-85925073    E-mail:jixie@vip.163.com

地址:四川省成都锦江工业开发区墨香路48号   邮编:610063

蜀ICP备08103512号

Powered by PageAdmin CMS