基于ANSYS的汽车传动轴的有限元分析

唐良兵1,王伟2
(1.中国船舶重工集团公司 第七二二研究所,湖北 武汉 430079;2.湖北航天技术研究院 总体设计所,湖北 武汉 430040)

摘要:利用ANSYS进行传动轴的强度及刚度校核,给出相应的扭转应力、单位扭转角等数据有限元分析结果,在进行强度及刚度校核时,还将利用ANSYS进行验证。在相同的受力条件下,分别对实心轴和空心轴进行应力分析,分析出传动轴中空心轴和实心轴的性能优劣,为传动轴设计提供理论依据。对实际工程中选用有着重要参考意义。
关键词:传动轴;有限元分析;空心轴与实心轴
中图分类号:O242.21        文献标识码:A            文章编号:1006-0316 (2013) 01-0045-05

Based on ANSYS to the finite element analysis of automobile transmission shaft
TANG Liang-bing1,WANG Wei2
( 1.The No.722 Research Institute, China Shipbuilding Industry Corporation, Wuhan 430079, China;2.The Graduate School, Hubei Aerospace Technology Academe, Wuhan 430040, China )

Abstract:This article uses the ANSYS to check the strength and rigidity of drive shaft, give the corresponding tensional stress, unit torsion angle data, use finite element analysis results, also check of the strength and stiffness will use ANSYS to verify. stress analysis of Solid shaft and hollow shaft under the same loading conditions to analyze the performance of the pros and cons of the drive shaft in the hollow shaft and solid shaft,  providing a theoretical basis in designing of shaft designed. And it’s very important reference significance for practical use.
Key words:drive shift;ANSYS;hollow shift and solid shift
———————————————
收稿日期:2012-06-18
作者简介:唐良兵(1975-),男,湖北武汉人,硕士,主要研究方向为精密机械设计、非标机械设计。

 

设为首页  |  加入收藏    |   免责条款
《机械》杂志版权所有     Copyright©2008-2012 Jixiezazhi.com All Rights Reserved 

  电话:028-85925070    传真:028-85925073    E-mail:jixie@vip.163.com

地址:四川省成都锦江工业开发区墨香路48号   邮编:610063

蜀ICP备08103512号

Powered by PageAdmin CMS