回转台结构的改造
李卫国,刘伟业
(新余钢铁集团有限公司 热连轧厂,江西 新余 338000)
摘要:回转台位于钢卷运输线的三岔口处,起着承上启下的作用。设备安装调试运行一个月后,回转台开始出现定位不准确、台面歪斜、转动不灵活等现象,通过对更换下来的设备的拆解观察,回转台轴承磨损严重,传动装置输出端的花键出现了裂纹。将液压马达减速机改为液压缸齿轮齿条驱动,支撑采用四个支撑轮代替,提高了回转台运转率,减少了设备维护量,能够满足生产需求。
关键词:回转台;回转轴承;定位;减速机
中图分类号:TG333.15           文献标志码:B        文章编号:1006-0316 (2013) 07-0078-03
Rotating table structure transformation 
LI Wei-guo,LIU Wei-ye
( Xingang Hot Strip Mill, Xinyu Iron & Steel Group Co., Ltd., Xinyu 338000, China )
Abstract:Rotary table is located in the factory of steel coil transportation line three junction, the connecting link between the preceding and the role. To conduct the follow-up process. installation debugging after one month, rotary table began positioning is not accurate, the table skew, the rotation is not flexible phenomenon. Observation dissembling facility of replacement, rotary table bearing wear seriously, transmission device the output spline appeared crack. The hydraulic motor speed reducer to hydraulic cylinder gear rack drive, supported by four supporting wheels instead, greatly improving the turret operation rate, reduce the volume of equipment maintenance, to meet production requirements.
Key words:rotating table;rotary bearing;positioning;speed reducer

———————————————
收稿日期:2012-02-01
作者简介:李卫国(1982-),男,江西新余人,本科,助理工程师,主要从事轧钢机械设备的技术工作。
 

 

设为首页  |  加入收藏    |   免责条款
《机械》杂志版权所有     Copyright©2008-2012 Jixiezazhi.com All Rights Reserved 

  电话:028-85925070    传真:028-85925073    E-mail:jixie@vip.163.com

地址:四川省成都锦江工业开发区墨香路48号   邮编:610063

蜀ICP备08103512号

Powered by PageAdmin CMS