缸套一体式密封垫的计算与模拟研究
王嘉,李胜利,李建新,胡卫中,樊丰
(华北柴油机有限责任公司 工艺技术处,河北 石家庄 050081)
摘要:CrMo耐磨合金铸铁缸套在加工时预先加工出一锥角,该锥角受到安装缸盖时的压力成型为一体式缸垫,通过理论计算出其受到挤压的数值范围。通过运用有限元模拟软件DEFORM,分析了其挤压过程中的平均应力以及其成型处的材料流动方向及流动速度,与实际相符合。
关键词:合金铸铁;缸套;一体式缸垫;DEFORM
The computation and simulate of the plain washer of the cylinder liner
WANG Jia,LI Sheng-li,LI Jian-xin,HU Wei-zhong,FAN Feng
( Technology Department, Huabei Diesel Engine Corporation, Shijiazhuang 050081, China )
Abstract:There is alawys a angle of the CrMo alloy cast iron cylinder liner, the angle is pushed by the force in assembling the cylinder head, by the computing, we know the range of the numerical value, by using the software DEFORM, we analysis the stress and the stress rate, the flow of the material, fit the natural.
Key words:alloy cast;cylinder liner;plain washer;DEFORM

———————————————
收稿日期:2012-06-14
作者简介:王嘉(1983-),男,河北石家庄人,工学硕士,工程师,主要从事缸套生产工艺工作;李胜利(1968-),男,河北石家庄人,工学硕士,研究员级高级工程师,主要从事内燃机工艺研究与管理工作;李建新(1966-),男,河北沧州人,工学学士,高级工程师,主要从事内燃机工艺基础研究工作;胡卫中(1978-),河北石家庄人,工学学士,主要从事内燃机工艺管理研究工作。
 

 

设为首页  |  加入收藏    |   免责条款
《机械》杂志版权所有     Copyright©2008-2012 Jixiezazhi.com All Rights Reserved 

  电话:028-85925070    传真:028-85925073    E-mail:jixie@vip.163.com

地址:四川省成都锦江工业开发区墨香路48号   邮编:610063

蜀ICP备08103512号

Powered by PageAdmin CMS