双层复合罩罩顶过渡弧半径对侵彻结果的影响
王瑶,田晓丽,马林,陈阳
(中北大学 机电工程学院,山西 太原 030051)
摘要:为了研究成型装药双层药型罩射流的形成过程,应用非线性分析软件LS-DYNA对成型装药条件下的双层药型罩射流进行了数值模拟,分析了成型装药双层药型罩在不同罩顶过渡弧半径条件下对射流特性参数的影响。结果表明:成型装药条件下,双层罩不同罩顶过渡弧半径对射流的特性有不同程度的影响,合理调整罩顶过渡弧半径有助于改善射流性能,在工程上有一定的指导意义。
关键词:聚能装药;药型罩;侵彻;数值模拟
中图分类号:TB71+2        文献标识码:A        文章编号:10060316 (2012) 01003504
Influence of double-layer composite liners radius of the transition arc in the penetration results
WANG Yao,TIAN Xiao-li,MA Lin,CHEN Yang
(College of Mechanical and Electrical Engineering,North University of China,Taiyuan 030051,China)
Abstract:To study the double-layer composite liners jet form process, Numerical simulate shaped charge under the conditions of double-layer liners jet by the LS-DYNA software and explore the liners jet characteristic parameters of different radius of the transition arc in the Cover Top.The results showed that: in condition of shaped charge, the double cover of different radius of the transition arc in the Cover Top have different degrees of the characteristics of the jet. A reasonable adjustment the in and out cover can help to improve the performance of. the jet.There have certain guiding significance on the engineering
Key wordsshaped charge;liners;penetration;numerical simulation

———————————————
收稿日期:2011-08-09
作者简介:王瑶(1986-),男,河南漯河人,硕士研究生,主要研究方向为武器系统动力学与仿真。

 

设为首页  |  加入收藏    |   免责条款
《机械》杂志版权所有     Copyright©2008-2012 Jixiezazhi.com All Rights Reserved 

  电话:028-85925070    传真:028-85925073    E-mail:jixie@vip.163.com

地址:四川省成都锦江工业开发区墨香路48号   邮编:610063

蜀ICP备08103512号

Powered by PageAdmin CMS