竹笋切片机研制与其传动轴的有限元分析
赵荣宽，林光春*，徐炳辉，廖勋宝
（四川大学 机械工程学院，四川 成都 610065）
摘要：为优化竹笋自动化加工生产线、满足竹笋加工机械化需求，研制了一种竹笋切片机。该竹笋切片机采用了离心原理，并使用双转盘，在传动轴的带动下同时转动，极大地提高了竹笋切片机的切片效率。同时确定了竹笋切片机主要部件的设计参数，并对其传动轴进行了有限元分析。采用SolidWorks对切片机的传动轴建立了三维模型，并将其导入有限元分析软件ANSYS中进行分析，得到了传动轴的应力应变及变形分布结果，从而为进一步改进完善竹笋切片机提供理论依据。
关键词：竹笋；切片机；离心；传动轴；有限元分析
中图分类号：TS255.8 文献标志码：A doi：10.3969/j.issn.1006-0316.2020.07.007
文章编号：1006－0316 (2020) 07－0042－05
Development of Bamboo Shoot Slicer and Finite Element Analysis of its Transmission Shaft
ZHAO Rongkuan，LIN Guangchun，XU Binghui，LIAO Xunbao
( School of Mechanical Engineering, Sichuan University, Chengdu 610065, China )
Abstract：In order to optimize the automatic production line of bamboo shoots and meet the mechanization demand of bamboo shoot processing, a bamboo shoot slicer was developed. The machine, whichadopts the centrifugal principle and uses two turntables, rotates simultaneously with the transmission shaft, and thus greatly improves the slicing efficiency. What's more, the main parameters were determined, and the finite element analysis on transmission shaft of bamboo shoot slicer was conducted. The three-dimensional model of the transmission shaft was built by SolidWorks, then it was imported into the finite element analysis software ANSYS, and the stress, strain and deformation distribution results of the transmission shaft were obtained, which provides a theoretical basis for further improvement of the bamboo shoot slicer.
Key words：bamboo shoots；slicer；centrifugal；transmission shaft；finite element analysis
———————————————
收稿日期：2019－12－03
基金项目：（川大－泸州）开袋即食野生罗汉笋关键技术及自动生产线研发（2017CDLZ-N10）
作者简介：赵荣宽（1995－），男，江苏徐州人，硕士研究生，主要研究方向为机械设计及理论、机构学与工业机器人。*通讯作者：林光春（1964－），男，四川成都人，博士，教授、硕士生导师，主要研究方向为机械设计及理论、机构学与工业机器人，E-mail：lingc@scu.edu.cn。
- 上一篇：关键参数对灌缝比影响的研究
- 下一篇：基于HFSS的电源机箱屏蔽效能的仿真分析
设为首页 | 加入收藏 | 免责条款
《机械》杂志版权所有 Copyright©2008-2012 Jixiezazhi.com All Rights Reserved
电话：028-85925070 传真：028-85925073 E-mail：jixie@vip.163.com
地址：四川省成都锦江工业开发区墨香路48号 邮编：610063
Powered by PageAdmin CMS