基于模糊死区补偿的曲面加工机器人PD控制研究

 朱海燕,刘备

(湖北交通职业技术学院 汽车与航空学院,湖北 武汉 430079)
摘要:针对曲面加工机器人中的死区,提出了一种基于模糊补偿的PD控制算法,该算法用模糊死区补偿器实现机器人中的死区补偿,PD控制算法用于机器人关节的轨迹控制,从而消除死区对机器人轨迹控制的影响;为了验证该算法的有效性,在MATLAB仿真平台进行了数字化仿真,仿真结果表明:与传统的PD控制算法相比,本文所提出的基于模糊死区补偿的PD控制算法能够有效的对机器人中的死区进行补偿,提高了曲面加工机器人的位置精度,减少了位置误差,从而提高了加工精度。
关键词:曲面加工;死区;模糊死区补偿;PD控制;MATLAB仿真
中图分类号:TP391.9;O159 文献标志码:A doi:10.3969/j.issn.1006-0316.2020.01.008
文章编号:1006-0316 (2020) 01-0046-06
Study on PD Control of Curved Surface Machining Robots Based on Fuzzy Dead Zone Compensation
ZHU Haiyan,LIU Bei
( Automative & Aviation School, Hubei Communications Technical College, Wuhan 430079, China )
Abstract:This paper put forward a PD control algorithm based on fuzzy compensation against the dead zone among curved surface machining robots. This algorithm realizes the dead zone compensation of robots via fuzzy dead zone compensator. The PD control algorithm can control the track of the joints of robot, and eliminate the effect of dead zone on the control of robot tracks. In order to check the algorithm validity, numerical simulation was made based on MATLAB Simulink platform. And the results show that compared to conventional PD control algorithm, the PD control algorithm based on fuzz dead zone compensation can effectively compensate the dead zone of curved surface machining robots, improving the positional accuracy and reducing positional error, thence improve the processing accuracy. 
Key words:curved surface machining;dead zone;fuzzy dead zone compensation;PD control;MATLAB simulation 
———————————————
收稿日期:2019-10-16
作者简介:朱海燕(1965-),男,湖北襄樊人,工学硕士,讲师,主要研究方向为车辆工程、机电一体化。
 

 

设为首页  |  加入收藏    |   免责条款
《机械》杂志版权所有     Copyright©2008-2012 Jixiezazhi.com All Rights Reserved 

  电话:028-85925070    传真:028-85925073    E-mail:jixie@vip.163.com

地址:四川省成都锦江工业开发区墨香路48号   邮编:610063

蜀ICP备08103512号

Powered by PageAdmin CMS