双级闭式斜齿轮传动优化设计
孙宏洁,孟广耀,黄居鑫,郭彬,王振华
(青岛理工大学 机械与汽车工程学院,山东 青岛 266520)
摘要:以双级闭式斜齿轮为研究对象,以独立的模数、齿数、传动比和螺旋角为设计变量,确定设计变量边界条件,将齿轮强度要求与不发生干涉作为约束条件,将斜齿轮传动总中心距最小作为目标函数,并结合内点惩罚函数法和MATLAB软件进行优化设计求解。与初始参数设计方案相比较,优化设计方案中各设计变量取圆整后,总传动中心距减少明显,优化设计效果较好。
关键词:双级闭式斜齿轮;约束条件;内点惩罚函数法;MATLAB
中图分类号:TP391 文献标志码:A doi:10.3969/j.issn.1006-0316.2019.04.005
文章编号:1006-0316 (2019) 04-0026-04
Optimization Design of Double-Stage Closed Bevel Gear Transmission
SUN Hongjie,MENG Guangyao,HUANG Juxin,GUO Bin,WANG Zhenhua
( School of Mechanical and Automotive Engineering, Qingdao Technological University, Qingdao 266520, China )
Abstract:In this paper, the double-stage closed helical gear is taken as the research object. The independent modular modulus, gear number, gear ratio and helix angle are used as design variables to determine the boundary conditions of the design variables. The gear strength requirements and non-interference are used as constraints, the total center-to-center distance of the helical gear is used as objective function, and combined with the internal point penalty function method and MATLAB software to optimize the design solution. Compared with the initial parameter design scheme, the total drive center distance is obviously reduced and the optimal design effect is better after the design variables are rounded.
Key words:two-stage closed helical gear constraint;constraint condition;internal point penalty function;MATLAB
———————————————
收稿日期:2018-10-30
作者简介:孙宏洁(1990-),女,山东烟台人,硕士研究生,主要研究方向为现代制造技术与系统。
 

 

设为首页  |  加入收藏    |   免责条款
《机械》杂志版权所有     Copyright©2008-2012 Jixiezazhi.com All Rights Reserved 

  电话:028-85925070    传真:028-85925073    E-mail:jixie@vip.163.com

地址:四川省成都锦江工业开发区墨香路48号   邮编:610063

Powered by PageAdmin CMS