基于MEMS安保机构微弹簧测试方法的分析
梁东升1,曾鹏飞1,尹艳超1,刘双杰2,郝永平2
(1.沈阳理工大学 机械工程学院,辽宁 沈阳 110159;2.沈阳理工大学 装备工程学院,辽宁 沈阳 110159)
摘要:介绍了S型微弹簧弹性系数的两种测量方法。在S型弹簧弹性系数计算公式的基础上,数字式显微镜试验方法通过对公式中主要影响因素的测量,计算出设计值与实际值的相对误差,并能够提出设计和加工的改善方法。用数字式显微镜方法进行大量的数据收集、数据整理、数据计算,是弹性系数研究的基础。为满足大批量弹性系数测试,在这基础上提出转台试验的测量方法。通过对转台试验原理的分析和验证,确定该测试方法能满足测试目的。
关键词:弹性系数;测量;数字式显微镜试验;转台试验
中图分类号:TJ06 文献标志码:A doi:10.3969/j.issn.1006-0316.2019.01.002
文章编号:1006-0316 (2019) 01-0007-05
Analysis of Micro-Spring Testing Method Based on MEMS Safe and Arm Device 
LIANG Dongsheng1,ZENG Pengfei1,YIN Yanchao1,LIU Shuangjie2,HAO Yongping2
( 1.School of Mechanical Engineering, Shenyang Ligong University, Shenyang 110159, China; 2.School of Equipment Engineering, Shenyang Ligong University, Shenyang 110159, China )
Abstract:This paper introduces two kinds of methods for measuring S micro spring elasticity coefficient. Based on the calculation formula of elastic coefficient of spring in the S type, by measuring the main influence factors of the formula with digital microscope, the relative error of the design value and the actual value is calculated, and the design and the processing can be improved. Digital microscopy method is the basis of elasticity coefficient for  large-scale data collecting, data processing, and data calculation. In order to meet the needs of mass elasticity coefficient test, measurement method for rotary table test is proposed on this foundation. Through the analysis and verification of the turntable test principle, the test method can help achieve the test purpose.
Key words:elastic coefficient;measurement;digital microscope;turntable test
———————————————
收稿日期:2018-07-23
基金项目:辽宁省自然科学基金(201705400791、20180550932)
作者简介:梁东升(1994-),男,山西临汾人,硕士研究生,主要研究方向为引信微机电系统。*通讯作者:曾鹏飞(1978-),男,河南信阳人,博士,副教授,主要研究方向为数字化设计、产品数据管理、数字化制造。
 

 

设为首页  |  加入收藏    |   免责条款
《机械》杂志版权所有     Copyright©2008-2012 Jixiezazhi.com All Rights Reserved 

  电话:028-85925070    传真:028-85925073    E-mail:jixie@vip.163.com

地址:四川省成都锦江工业开发区墨香路48号   邮编:610063

蜀ICP备08103512号

Powered by PageAdmin CMS