基于高压放电的大输液塑瓶泄漏检测技术研究

 严扎杰,任德均,陈儒侠,高永勋,付兴勇

(四川大学 制造科学与工程学院,四川 成都 610065)
摘要:为了验证利用高压放电进行大输液塑瓶微小泄漏检测的可行性,首先对实验装置建立了等效电路,并进行了高压放电检漏的原理分析。由此设计了实际实验平台,该平台通过数据采集卡采集试验过程中的电流数据,通过基于LabVIEW采集程序的上位机读取实验数据,接着利用MATLAB进行数据处理。最终经过实际实验,验证了利用高压放电进行大输液塑瓶微小泄漏检测的可行性。
关键词:高压放电;检漏;数据采集;LabVIEW;MATLAB
中图分类号:TH772 文献标志码:A doi:10.3969/j.issn.1006-0316.2018.12.006
文章编号:1006-0316 (2018) 12-0019-04
Research on Large Infusion Plastic Bottle Leakage Detection Technology Based on High Voltage Discharge
YAN Zhajie,REN Dejun,CHEN Ruxia,GAO Yongxun,FU Xingyong
( School of Manufacturing Science and Engineering, Sichuan University, Chengdu 610065, China )
Abstract:In order to verify the feasibility of detecting tiny leakage of large infusion plastic bottles by using high voltage discharge, an equivalent circuit for the experimental device was established and the principle of high voltage discharge leakage detection was analyzed. The actual experiment platform is designed on this basis. The platform collects the current data through the data acquisition card during the test. The host computer reads the experimental data based on LabVIEW acquisition program, and processes the experimental data by using MATLAB. The feasibility of using high voltage discharge to detect tiny leakage of large infusion plastic bottle is verified in actual experientmemt.
Key words:high voltage discharge;leakage detection;data acquisition;LabVIEW;MATLAB
———————————————
收稿日期:2018-03-05
作者简介:严扎杰(1994-),男,藏族,甘肃舟曲人,硕士研究生,主要研究方向为嵌入式控制系统;任德均(1971-),男,四川成都人,博士,副教授,主要研究方向为嵌入式控制系统、机电一体化、机器视觉;陈儒侠(1993-),男,四川南充人,硕士研究生,主要研究方向为机器视觉;高永勋(1991-),男,河南郑州人,硕士研究生,主要研究方向为机器视觉;付兴勇(1990-),男,山东菏泽人,硕士研究生,主要研究方向为机器视觉。
 

 

设为首页  |  加入收藏    |   免责条款
《机械》杂志版权所有     Copyright©2008-2012 Jixiezazhi.com All Rights Reserved 

  电话:028-85925070    传真:028-85925073    E-mail:jixie@vip.163.com

地址:四川省成都锦江工业开发区墨香路48号   邮编:610063

蜀ICP备08103512号

Powered by PageAdmin CMS