基于Inventor的滑索支架有限元分析及优化

 李晨阳,马栋联,康红伟,张俊峰

(黄河科技学院,河南 郑州 450000)
摘要:支架是滑索的主要受力零件之一,在绳索拉力作用下,易产生应力集中。利用Inventor软件对滑索支架进行建模、有限元分析等,旨在探讨其应力分布,并寻求优化的结构设计。分析结果显示,滑索支架在相同载荷条件下,随着支杆结构位置变化,最大应力集中值改变。横斜杆结构形态时,最大应力集中值只是横杆滑索支架的30%。另外,左右立支架与斜支撑架间的角度a的改变对于滑索支架的最大应力值有着明显影响。综上所述,在横斜杆状态下,横斜杆在30°±1°之间时,应力集中值最小。
关键词:有限元分析;滑索支架;Inventor
中图分类号:TP302.7 文献标志码:A doi:10.3969/j.issn.1006-0316.2018.07.005
文章编号:1006-0316 (2018) 07-0023-03
Finite Element Analysis and Optimization of the Skid Support Based on INVENTOR 
LI Chenyang,MA Donglian,KANG Hongwei,ZHANG Junfeng
( Huanghe Science & Technology College, Zhengzhou 450000 , China )
Abstract:the bracket is one of the main force parts of the slip rope, which can produce stress concentration under the action of rope. Using the Inventor software to model it, the finite element analysis is designed to explore its stress distribution and optimize the structure design. The analysis results show that the maximum stress concentration value of slip rope is changed under the same load condition with the position of the support rod. The maximum stress concentration is only 30% of the strut of rod slip. In addition, the change of Angle a between the left and right stand and the inclined support frame has obvious influence on the maximum stress value of the slip bracket. Given all this, in the condition of extremely stem, extremely rod between 30°+1°, minimum value of stress concentration. 
Key words:finite element analysis;skid support;Inventor
———————————————
收稿日期:2017-09-29
基金项目:黄河科技学院“创新创业教育示范课程”建设项目——机械创新设计综合
作者简介:李晨阳(1997-),女,河南洛阳人,本科,主要研究方向为机械设计制造及其自动化。
 

 

设为首页  |  加入收藏    |   免责条款
《机械》杂志版权所有     Copyright©2008-2012 Jixiezazhi.com All Rights Reserved 

  电话:028-85925070    传真:028-85925073    E-mail:jixie@vip.163.com

地址:四川省成都锦江工业开发区墨香路48号   邮编:610063

蜀ICP备08103512号

Powered by PageAdmin CMS