上流式水轮曝气机CFD仿真分析
曾梦玮1，薛波2，林华1，岳婷1
（1.四川省机械研究设计院，四川 成都 610063；2.方圆标志认证集团四川有限公司，四川 成都 610014）
摘要：为保证曝气机的性能满足设计要求，对曝气机水力模型进行三维建模，基于k-ω多相湍流模型，通过对扩散过程、传质过程和气液两相流理论的分析，利用ANSYS CFX有限元仿真软件，对曝气机的内部流场进行数值模拟。得到曝气机内部流场的速度分布图和压力分布图，计算了曝气机作用下的水体含氧量及曝气机效率两项主要技术指标。结果表明，利用计算流体动力学进行三维多相湍流数值模拟得到的两项技术指标均能达到设计需求，为曝气机优化设计提供了参考和指导。
关键词：曝气机；多相湍流；水体含氧量；曝气机效率
中图分类号：TP391.9 文献标志码：A doi：10.3969/j.issn.1006-0316.2018.06.005
文章编号：1006－0316 (2018) 06－0032－06
CFD Simulation Analysis of Upflow Turbine Aerator
ZENG Mengwei1，XUE Bo2，LIN Hua1，YUE Ting1
( 1.Sichuan Provincial Machinery Research & Design Institute, Chengdu 610063, China; 2.China Quality Mark Certification Group Sichuan Co., Ltd., Chengdu 610014, China )
Abstract：The three-dimensional modeling of the aerator hydraulic is created to ensure the performance of the aerator to meet the design requirements. Based on the k-ω multiphase turbulence model, ANSYS CFX finite element simulation software is used to simulate the internal flow field of the aerator. In the process, the paper analyzes the diffusion process, mass transfer process and gas-liquid two-phase flow theory. The velocity profile and pressure distribution chart of the flow field inside the aerator are obtained. Two main technical indexes of the oxygen content of the aerator and the aerator efficiency are calculated. The results show that the two technical indexes, which are obtained from numerical simulation of three-dimensional multiphase turbulence through computational fluid dynamics, meet the design requirements. The research finding provides reference and guidance for the optimal design of the aerator.
Key words：aerator；multiphase turbulence；oxygen content in liquid；aerator efficiency
———————————————
收稿日期：2017－12－26
作者简介：曾梦玮（1989－），女，四川自贡人，本科，工程师，主要研究方向为机械设计制造及计算机辅助设计。
- 上一篇：国内高校机器人研究现状分析
- 下一篇：齿轮啸叫影响因素的快速建模研究方法
设为首页 | 加入收藏 | 免责条款
《机械》杂志版权所有 Copyright©2008-2012 Jixiezazhi.com All Rights Reserved
电话：028-85925070 传真：028-85925073 E-mail：jixie@vip.163.com
地址：四川省成都锦江工业开发区墨香路48号 邮编：610063
Powered by PageAdmin CMS