基于ANSYS WorkBench的精密卧式机床动静态性能分析

 卫亚斌,殷国富,彭骥,谭峰

(四川大学 制造科学与工程学院,四川 成都 610065)
摘要:精密卧式机床整机静动力学特性对其使用寿命及加工性能有重要影响。利用有限元分析软件ANSYS WorkBench对自行设计的精密卧式机床进行了整机静动力学分析。静力分析中,以实际工况为基础添加载荷和约束,得到整机应力和应变分布图,结果验证了整机设计的合理性。动态分析中,通过谐响应分析,得出相同激振力下出现振幅峰值的共振点的频率,再通过模态分析得出这几个频率处的振型,对振型分析得出刚度最薄弱处为立柱。
关键词:精密卧式机床;静力分析;谐响应分析;模态分析
中图分类号:TG502.1;TH122 文献标志码:A doi:10.3969/j.issn.1006-0316.2018.05.008
文章编号:1006-0316 (2018) 05-0029-05
The Finite Element Analysis of the Precision Horizontal MC Based on the ANSYS WorkBench
WEI Yabin,YIN Guofu,PENG Ji,TAN Feng
( School of Manufacturing Science and Engineering, Sichuan University, Chengdu 610065, China )
Abstract:The finite element analysis of the precision horizontal MC has important influence on its machining performance. According to the spindle structure characteristics of our own designed precision horizontal MC. Through the static analysis, load and constraint are added on the basis of actual working conditions, and obtained the stress and strain distribution diagram of the whole machine, the analysis results verify the rationality of the whole machine design. Through the dynamic analysis, Through the harmonic response analysis, it is concluded that under the same vibration force peak amplitude of the frequency of the resonance point, again through the modal analysis the several frequency vibration mode, the modal analysis it is concluded that the most vulnerable place for column stiffness.
Key words:precision horizontal MC;static analysis;harmonic response analysis;modal analysis
———————————————
收稿日期:2018-01-22
基金项目:四川省科技支撑项目(2016KJT0085-2016G)
作者简介:卫亚斌(1991-),男,山西临汾人,硕士研究生,主要研究方向为结构设计与分析;殷国富(1956-),男,四川西充人,教授,博士生导师,主要研究方向为制造自动化、智能设计技术、CAD/CAM/CIMS。
 

 

设为首页  |  加入收藏    |   免责条款
《机械》杂志版权所有     Copyright©2008-2012 Jixiezazhi.com All Rights Reserved 

  电话:028-85925070    传真:028-85925073    E-mail:jixie@vip.163.com

地址:四川省成都锦江工业开发区墨香路48号   邮编:610063

蜀ICP备08103512号

Powered by PageAdmin CMS