基于机床与测头的大型曲面轮廓检测研究

 田海林1,陈翔鹏2,方辉1*,丁毅2,唐筱岚2

(1.四川大学 制造科学与工程学院,四川 成都 610000;2.航空工业成飞民用飞机有限责任公司,四川 成都 610091)
摘要:大型曲面外形由于其尺寸较大,开发专用检测仪器设备成本太高,如何高效率低成本地进行大型曲面轮廓精度检测仍是一个亟待解决的难题。根据已有的接触式测量技术,结合飞机大型结构件外形轮廓精度检测的实际需求,探讨利用数控机床和工件测头等加工、检测设备,进行大型曲面外形轮廓精度测量,提出了一种测量方法,并进行了相关仿真和试验研究,验证了该方案的可行性。
关键词:大型曲面;接触式测量;飞机大型结构件
中图分类号:TH124 文献标志码:A doi:10.3969/j.issn.1006-0316.2018.04.009
文章编号:1006-0316 (2018) 04-0038-05
Large-scale Curved Surface Shape Detection Based on Machine Tool and Measurement Technology
TIAN Hailin1,CHEN Xiangpeng2,FANG Hui1,Ding Yi2,TANG Xiaolan2
( 1.College of Manufacturing Science and Engineering, Sichuan University, Chengdu 610000, China;2.AVIC Chengdu Aircraft Industrial( Group )Co., Ltd., Chengdu 610091, China )
Abstract: Because of its large size, the cost of the development of special equipment for testing large-scale curved surface shape is high. How to lower the cost and to increase the accuracy of detection is still a problem Based on the existing contact measurement technology, and combined with the actual needs of the outline accuracy of the large-scale structural parts of the aircraft, this paper uses the existing processing equipment to conduct accurate measurement of the large-scale curved surface profile. The paper puts forward a measurement method and carries out related simulation and experimental research, which verifies the feasibility of the solution.
Key words:large surface;contact measurement technology;structural parts of aircraft
———————————————
收稿日期:2017-12-01
基金项目:四川省科技支撑计划项目(2016GZ0013、2014GZ0122)
作者简介:田海林(1994-),男,重庆人,硕士研究生,主要研究方向为数控机床结构设计。*通讯作者:方辉(1973-),男,湖南岳阳人,博士,副教授,主要研究方向为数控装备热误差分析与补偿、精密加工技术及装备。
 

 

设为首页  |  加入收藏    |   免责条款
《机械》杂志版权所有     Copyright©2008-2012 Jixiezazhi.com All Rights Reserved 

  电话:028-85925070    传真:028-85925073    E-mail:jixie@vip.163.com

地址:四川省成都锦江工业开发区墨香路48号   邮编:610063

蜀ICP备08103512号

Powered by PageAdmin CMS