仪表板除霜风道设计

 李朔

(安徽江淮汽车集团股份有限公司,安徽 合肥 230601)
摘要:仪表板设计中除霜风道设计是其最重要的设计之一。阐述了仪表板除霜风道设计的主要思路:先确定燃烧点位置、吹风方向、格栅位置、格栅长度及分布等关键要素,再进行结构设计,并简明介绍了各风口分风比、格栅出口处气流速度、风挡玻璃表面风速分布等相关CFD指标,以此保证仪表板除霜风道的最优化设计,为整车的除霜功能打下坚实的基础。
关键词:仪表板;除霜风道;CFD指标
中图分类号:U463 文献标志码:A doi:10.3969/j.issn.1006-0316.2017.10.011
文章编号:1006-0316 (2017) 10-0051-04
The Design of Dashboard Defrost Duct
LI Shuo
( Anhui Jianghuai Automobile Group. Ltd., Hefei 230601, China ) 
Abstract: The design of defrosting duct is one of the most important part in dashboard design. This article focuses on the main ideas of dashboard defrost duct design: determine the location of the combustion point, blowing direction, grille position, grid length and distribution, and then begin the structural design. And the article related CFD target to ensure optimal design for the dashboard defrost duct defrost function, and make great contribution to the vehicle defrost.
Key words:dashboard;defrost duct;CFD target
———————————————
收稿日期:2017-03-10
作者简介:李朔(1985-),男,安徽合肥人,本科,工程师,主要研究方向为汽车内饰仪表台结构设计。
 

 

设为首页  |  加入收藏    |   免责条款
《机械》杂志版权所有     Copyright©2008-2012 Jixiezazhi.com All Rights Reserved 

  电话:028-85925070    传真:028-85925073    E-mail:jixie@vip.163.com

地址:四川省成都锦江工业开发区墨香路48号   邮编:610063

蜀ICP备08103512号

Powered by PageAdmin CMS