航空发动机转子装配螺栓自动拧紧机设计与分析

 魏企业,石宏,孙方成,于群

(沈阳航空航天大学 航空航天工程学部,辽宁 沈阳 110136)
摘要:传统航空发动机转子装配螺栓拧紧设备自动化程度低,对发动机装配效率及装配质量影响较大。结合国内航空发动机转子装配螺栓拧紧设备现状,基于Pro/E软件设计了一种新型航空发动机转子装配螺栓自动拧紧机。并运用ANSYS Workbench对关键承力构件进行分析,得到其最大应力、应变及变形,据此可对关键结构件进行强度和刚度校核。
关键词:航空发动机;螺栓连接;自动拧紧机
中图分类号:V262.4+1 文献标志码:A doi:10.3969/j.issn.1006-0316.2017.06.014
文章编号:1006-0316 (2017) 06-0067-04
Design and Analysis of Aero Engine Rotor Automatic Bolt Tightening Machine Structure
WEI Qiye,SHI Hong,SUN Fangcheng,YU Qun
( Faculty of Aerospace Engineering, Shenyang Aerospace University, Shenyang 110136, China )
Abstract:The traditional aircraft engine rotor bolt assembly equipment of low degree of automation, influence on engine efficiency and quality of assembly greatly. In this paper, combined with the current situation of the domestic aero-engine rotor assembly bolt tightening device, a new type of aero engine rotor assembly bolt automatic tightening machine is designed based on the Pro/E software. And ANSYS Workbench is used on the key supporting component of force analysis. Compared with the maximum deformation and maximum stress, the mechanical strength and stiffness of the structure is checked.
Key words:aero engine;bolted connection;aero engine rotor automatic bolt tightening machine
———————————————
收稿日期:2016-12-23
作者简介:魏企业(1993-),男,河南周口人,硕士研究生,主要研究方向为航空发动机强度、振动及噪声。
 

 

设为首页  |  加入收藏    |   免责条款
《机械》杂志版权所有     Copyright©2008-2012 Jixiezazhi.com All Rights Reserved 

  电话:028-85925070    传真:028-85925073    E-mail:jixie@vip.163.com

地址:四川省成都锦江工业开发区墨香路48号   邮编:610063

蜀ICP备08103512号

Powered by PageAdmin CMS