浇口设计中的CAE优化分析
史昆玉*,王永峰,何朋飞,董明青
(武汉工程大学,湖北 武汉 430074)
摘要:以电表壳为例分析壳类塑件在注塑过程中最易产生的问题(翘曲变形、熔接痕、气穴),通过Moldflow的模拟过程发现传统模具设计中易导致塑件变形并对其进行优化分析,使产品在设计阶段得到充分优化,缩短产品的开发周期并最终使产品质量(翘曲变形、熔接痕、气穴)得到较大的改善。
关键词:壳类塑件;翘曲变形;气穴;CAE优化
中图分类号:TP391.9 文献标志码:A doi:10.3969/j.issn.1006-0316.2017.04.010
文章编号:1006-0316 (2017) 04-0042-05
The Gate Design of CAE Optimization Analysis
SHI Kunyu,WANG Yongfeng,HE Pengfei,DONG Mingqing
( Wuhan Institute of Technology, Wuhan 430074, China )
Abstract:Based on a shell plastic shells is a kind of plastic parts as an example analysis of problems in injection molding process is the easiest(buckling deformation、welding scar, air pocket),By Moldflow simulation found that traditional mould design can cause plastic deformation and carries on the optimization analysis, make full optimization of the product at the design stage, shorten the product development cycle and ultimately make the product quality (buckling deformation, welding scar, air pocket) to get greater improvement.
Key words:shells plastic parts;buckling deformation;air pocket;CAE optimization
———————————————
收稿日期:2016-10-19
基金项目:武汉工程大学科学研究基金项目资助(k201519)
作者简介:王永峰(1991-),男,安徽宿州人,工学硕士,主要研究方向为注塑模仿真。*通讯作者:史昆玉(1972-),女,湖北武汉人,工学博士,副教授,主要研究方向为模具工艺参数及结构优化。
 

 

设为首页  |  加入收藏    |   免责条款
《机械》杂志版权所有     Copyright©2008-2012 Jixiezazhi.com All Rights Reserved 

  电话:028-85925070    传真:028-85925073    E-mail:jixie@vip.163.com

地址:四川省成都锦江工业开发区墨香路48号   邮编:610063

蜀ICP备08103512号

Powered by PageAdmin CMS