基于Matlab的双头双螺杆泵转子型线设计
朱君,张帆,吴高捷,孙亚静
(扬州大学 机械工程学院,江苏 扬州 225127)
摘要:选用长幅外摆线加上外摆线相结合的情况,设计双头双螺杆泵的端面型线,利用坐标变换推导出各段型线方程,在Matlab环境下开发人机交互程序生成所需要的不同参数、不同类型下的转子端面型线。结果表明:在改变参数和型线类型的情况下,使用这种人机交互界面的程序可以大大的简化大量重复的计算工作。
关键词:双头双螺杆泵;Matlab;型线;人机交互
中图分类号:TP391 文献标志码:A doi:10.3969/j.issn.1006-0316.2017.04.008
文章编号:1006-0316 (2017) 04-0030-05
Design of Rotor Profile of Double Head Double Screw Pump Based on Matlab
ZHU Jun,ZHANG Fan,WU Gaojie,SUN Yajing
( School of Mechanical Engineering, Yangzhou University, Yangzhou 225127, China )
Abstract:The epicycloids plus a combination of cycloid profile design, twin screw pump, using coordinate transformation derived segments linear equations; rotor profile of different parameters needed to generate the development of human-machine interface in the Matlab environment under the. The results show that, in the case of changing parameters, the program can greatly simplify a large number of repetitive calculations.
Key words:double head double screw pump;matlab;type-line;humancomputer interaction
———————————————
收稿日期:2016-11-01
基金项目:舰船用高性能双螺杆泵的研究与开发(BY2015061-04);面向太阳能集热的高效螺杆膨胀动力驱动技术(YZ2016255)
作者简介:朱君(1990-),男,江苏徐州人,硕士研究生,主要研究方向为平衡式双螺杆泵性能分析与优化改进;张帆(1975-),男,江苏扬州人,博士,副教授,主要研究方向为双螺杆泵性能分析与优化改进。
 

 

设为首页  |  加入收藏    |   免责条款
《机械》杂志版权所有     Copyright©2008-2012 Jixiezazhi.com All Rights Reserved 

  电话:028-85925070    传真:028-85925073    E-mail:jixie@vip.163.com

地址:四川省成都锦江工业开发区墨香路48号   邮编:610063

蜀ICP备08103512号

Powered by PageAdmin CMS