基于知识库的设备装舰用紧固件模块开发技术

 卢永进,肖鹏安

(中国舰船研究设计中心,湖北 武汉 430064)
摘要:合适的紧固件选取作为设备装舰设计技术中的重要内容。结合工程实践,通过对设备装舰紧固件标准规范与组成进行系统分析,建立了一种基于知识库的紧固件选用方法,形成了基于VBA语言的模块开发技术路线,最后对开发出的紧固件模块进行了详细的操作说明。该模块具备设备装舰设计示意图快速绘制、明细表生成等功能,从而提高了设计质量和绘图效率。
关键词:知识库;舰船;紧固件;二次开发
中图分类号:U662.1 文献标志码:A doi:10.3969/j.issn.1006-0316.2017.02.001
文章编号:1006-0316 (2017) 02-0001-04
Fastener Module Development Technology for Warship Equipment Installation Based on the Knowledge Base
LU Yongjin,XIAO Peng'an
( China Ship Development and Design Center, Wuhan 430064, China )
Abstract:The selection of suitable fasteners has become an important content of warship equipment installation technology. Combination with the engineering practice, standard specification and composition of fasteners for warship equipment installation were studied, fastener selection method based on knowledge base was established. Meanwhile, the technical route of fastener module using VBA language developed was constructed. Finally, the detailed instructions of the fastener module were illustrated. This module mainly realizes the functions of the rapid drawing for fastener design, accurate producing bills of material and so on, which can improve the design quality and drawing efficiency.
Key words:knowledge base;warship;fastener;secondary development
———————————————
收稿日期:2016-09-14
基金项目:国家部委基金资助项目
作者简介:卢永进(1982-),男,四川泸县人,博士,工程师,主要研究方向为船舶设计信息化。
 

 

设为首页  |  加入收藏    |   免责条款
《机械》杂志版权所有     Copyright©2008-2012 Jixiezazhi.com All Rights Reserved 

  电话:028-85925070    传真:028-85925073    E-mail:jixie@vip.163.com

地址:四川省成都锦江工业开发区墨香路48号   邮编:610063

蜀ICP备08103512号

Powered by PageAdmin CMS