汽车检具开发流程及在产品开发中的应用

 赵娜

(安徽江淮汽车股份有限公司 工艺工程院供方协同开发部,安徽 合肥 230601)
摘要:汽车检具对提升产品关键精度起到至关重要的作用。以检具的设计原则为基础,从提高零件的精度一致性、检具的使用效率和利用率,以及降低工装开发成本等为目的,对检具的开发过程进行研究。检具开发过程中通过设计方法的优化和检具制作技术的改进,在不断提升产品质量、缩短产品开发周期的同时,提高了产品竞争力。此外,通过合理规划工装开发,减少工装开发数量,现场管理更加方便和有序。目前检具的设计过程中,此类方法已得到应用。
关键词:检具;汽车;工装开发
中图分类号:U467.4 文献标志码:A doi:10.3969/j.issn.1006-0316.2016.11.014
文章编号:1006-0316 (2016) 11-0054-04
Design Method of Inspection Tools and Application in Product
ZHAO Na
( Supplier Collaborative Development Department of Process Engineering Institute, Anhui Jianghuai Automobile Co., Ltd., Hefei 230601, China )
Abstract:Vehicle Inspection tools play an important role in improving the critical accuracy of product. Based on the design principle of the inspection tool, and for the purpose of improving accuracy of the parts, the utilization rate, as well as the reduction of tooling development costs. We studied the development process of inspection tools. In the development process, the optimization of the design method and the improvement of the inspection tools make the product quality better, shorten the product development cycle, and improve the competitiveness of the products. In addition, through the rational planning of tooling development, we can reduce the number of inspection tools, site management is more convenient and orderly. At present, this method has been applied to the design the inspection tool.
Key words:inspection tools;automobile;tooling development
———————————————
收稿日期:2016-06-13 
作者简介:赵娜(1985-),河北邢台人,本科,助理工程师,主要从事汽车产品工装(模具、检具等)开发工作。
 

 

设为首页  |  加入收藏    |   免责条款
《机械》杂志版权所有     Copyright©2008-2012 Jixiezazhi.com All Rights Reserved 

  电话:028-85925070    传真:028-85925073    E-mail:jixie@vip.163.com

地址:四川省成都锦江工业开发区墨香路48号   邮编:610063

蜀ICP备08103512号

Powered by PageAdmin CMS