一种五轴加工中心角度头固定装置设计
陈本锋1,李灿军2
(1.成都工贸职业技术学院,四川 成都 610000;2.成都恒信创智科技有限公司,四川 成都 610000)
摘要:五轴加工中心在加工存在侧向轴颈的复杂零件时,刀具和零件的过切干涉和碰撞干涉经常发生,影响了加工质量。要充分发挥五轴数控加工的优势,必须设法解决这一难题。以往的经验是从编程和算法方面进行优化,该方法路径复杂、效率不高、精度较低、普适性较差。而采用新设计的角度头固定装置加工类似零件,经实证可以从结构上避免轴颈侧铣加工时产生的干涉现象,提高夹具的定位精度。该固定装置结构简单、成本低廉、满足功能需要,给企业实际加工提供了一种解决方案。
关键词:加工中心;附件;角度头;固定装置
中图分类号:TG68 文献标志码:A doi:10.3969/j.issn.1006-0316.2016.09.014
文章编号:1006-0316 (2016) 09-0060-04
Design of a Device for Fixing the Five Axis Machining Center Angle Head
CHEN Benfeng1,LI Canjun2
( 1.Chengdu Industry and Trade College, Chengdu 610000, China; 2.Chengdu Hengxin Powerise Technology Co., Ltd., Chengdu 610000, China )
Abstract:In the machining center of five axis, when machining complex parts with lateral neck, the over cut interference and collision interference between the cutting tool and the part often occur, which affects the machining quality. To give full play to the advantages of the five axis CNC machining, we must try to solve this problem. The previous experience is optimized from the programming and algorithm, the method is complex, the efficiency is not high, the accuracy is low, and the universality is poor. And the new design of the angle head fixing device processing similar parts, the empirical research can avoid the interference phenomenon produced and improve the positioning accuracy of the fixture. The fixing device has the advantages of simple structure, low cost and satisfying function requirement, and provides a solution for the actual processing of the enterprise.
Key words:machining center;attachment;angle head;fixing device
———————————————
收稿日期:2016-04-18 
作者简介:陈本锋(1982-),男,四川成都人,硕士,讲师,主要研究方向为机械设计制造及自动化;李灿军(1981-),男,四川成都人,机械工程师,主要研究方向为精密制造技术。
 

 

设为首页  |  加入收藏    |   免责条款
《机械》杂志版权所有     Copyright©2008-2012 Jixiezazhi.com All Rights Reserved 

  电话:028-85925070    传真:028-85925073    E-mail:jixie@vip.163.com

地址:四川省成都锦江工业开发区墨香路48号   邮编:610063

蜀ICP备08103512号

Powered by PageAdmin CMS